️ How to Use Tangit PVC-U 500 ml
-
Preparation
-
Clean the Surfaces: Use Tangit Cleaner or a suitable solvent to thoroughly clean the pipe and fitting ends.
-
Dry Fit: Assemble the parts without adhesive to ensure proper fit and alignment.
-
Chamfer Edges: Remove any burrs or sharp edges from the pipe to ensure a smooth fit.Vinidex Pty Ltd+1westlakepipe.com+1
-
-
Application
-
Apply Adhesive: Using the built-in brush, apply an even layer of Tangit adhesive to the pipe end.
-
Apply to Fitting: Apply a thinner layer to the inside of the fitting socket.
-
Join Parts: Quickly insert the pipe into the fitting, giving a slight twist to spread the adhesive evenly.westlakepipe.com+1wnwsoln.com+1Oatey+1westlakepipe.com+1
-
-
Setting Time
-
Hold Firmly: Maintain pressure on the joint for at least 30 seconds to ensure proper bonding.
-
Curing Time: Allow the joint to cure for a minimum of 15 minutes before handling. Full strength is typically achieved after 24 hours.Vinidex Pty Ltd+2Oatey+2digitalassets.reecegroup.com.au+2
-
⚠️ Safety Precautions
-
Ventilation: Ensure the work area is well-ventilated to avoid inhaling fumes.
-
Protective Gear: Wear gloves and safety glasses to protect against accidental contact.
-
Storage: Store the adhesive in a cool, dry place, away from direct sunlight and sources of heat.
